2XX Series

There many different doors under this style.  This is a square corner compartment door which has also been used as a generator doors, fuel doors, or even as cabinet style doors.

There is versatility with the inner extrusion.  It can accommodate two different panel thicknesses depending on your application - either 3/16" or 1/2".

Latch Styles

• Thumb Latches
• Trigger Latches
• Key Lock

The extrusions are available in mill finish or powder coated, and the panels are available in an array of colors.

As for the hinge, each series listed uses the continuous hinge.

200 Series

The mounting method for this door is to screw the door into the unit from the exterior which means the screw heads will be visible after installation.

205 Series

The 205 Series is same door as the 200 except it has a different outer extrusion.  The outer extrusion on this door has a cleaner look and feel because there are no visible screw heads after mounting the door.  The mounting screws are actually screwed into the sidewall from the opening of the door.

250 Series

The 250 Series uses the same outer extrusion as the 200 Series.  Thus, it will have visible screw heads on the exterior of the unit after installation.

The panel thickness on the 250 Series remains the same as the other series; however, the inner on the 250 is thicker and more visible.

Shown above as a 200 Series Fuel Door

Shown as a 205 Fuel Door

Shown as a Cabinet Style 205 Door

Shown as a 250 Fuel Door

Shown as a 250 Compartment Door

Shown as a 300 Generator Door

350 Series

This is our line of Concession Doors.  These doors cover and protect the concession window on your unit.

The 350 Concession Door utilizes that same outer as the 301 Series and offers the rounded snap trim to cover the mounting screw heads.

There is versatility with the inner extrusion.  It can accommodate two different panel thicknesses depending on your application - either 3/16" or 1/2".

Latch Styles

• Thumb Latches
• Trigger Latches
• Key Lock

The extrusions are available in mill finish or powder coated, and the panels are available in an array of colors.

As for the hinge, each series listed uses the continuous hinge.

This door has the ability to be used as a single panel door or can be used as a split door with a horizontal hinge for a fold-up marquee when the door is open.  The split part of the door is generally made with Lexan in either clear or white.

Gas struts are also available to assist with holding the door in the open position.

Shown as a 350 Series Concession Door in the closed position

Shown as a 350 Series Concession Door in the open position

Shown as a 350 Series Concession Split Door with a Fold-Up Marquee

40X Series

This popular series from Challenger Door is commonly used as Entrance Doors or as larger Compartment Doors with or without Vents.

There are a couple of latch styles available.

• Travel Trailer (TT)
• FMVSS

This door can be ordered with either a continuous hinge or a 5-part hinge.

This series can be used as a single door or double-door.  If ordered as a double-door, by default the left door will have an inside handle and top and bottom plungers to hold door securely closed.  As an upgrade, a D-ring can be installed to the left door for the ability to open the door from the outside.

There are several window styles available including a peephole.  Also, there is an optional drip cap available for this door.

The panel is approximately 1 1/2" thick, and the extrusion can accommodate up to 1 3/8" wall thickness.

400 Series

This outer frame of this series has visible screw heads once it has been mounted on your unit.  We do, however, offer an optional plastic screw cover which will hide the visible mounting screw heads.

401 Series

The 401 Series has all of the normal features offered in the 4XX series of products, but it offers the 401 outer extrusion which provides an extra lip to mount an optional aluminum screw cover.

405 Series

The 405 Series is similar to the 400 Series door except that the mounting screw heads are not visible after installation.  The door is mounted from the door opening.

Shown as a 400 Series Single Door

Shown as a 400 Series Double Door

Shown as a 405 Series Double Door with D-ring in Left Door

Shown as a 405 Series Single Door

Shown as 405 Series Compartment Door

45X Series

This door is our square corner entrance door.  It is the same door as the 400 and 405 except it comes with a screen door.

There are a couple of latch styles available.

• Travel Trailer (TT)
• FMVSS

This door can be ordered with either a continuous hinge or a 5-part hinge.

There are several window styles available including a peephole.  Also, there is an optional drip cap available for this door.

The panel is approximately 1 1/2" thick, and the extrusion can accommodate up to 1 3/8" wall thickness.

450 Series (400 Series with Screen Door)

The 450 Series is the same as the 400 Series except it has a screen door.  The outer frame of this series has visible screw heads once it has been mounted on your unit.  We do, however, offer an optional plastic screw cover which will hide the visible mounting screw heads.

455 Series

The 455 Series is the same as the 405 Series except that it has a screen door.  The mounting screw heads are not visible after installation.  The door is mounted from the door opening.

Note:

We do not currently offer a 401 Series Door with a Screen Door, but if you are looking for a similar door to the 401 with a Screen Door and the aluminum screw cover, you will need to look at the 950 Series Square Corner Entrance Door.

1250 Series

The 1250 Series Roof Hatch Door is an 18" aluminum escape hatch style door.

This door is available with or without as gas strut to hold the door open.

The edges are folded over and there is a foam-rubber seal.

The protrusion from the roof is approximately 1 3/4" after installation.