250 Series

The 250 Series uses the same outer extrusion as the 200 Series. Thus, it will have visible screw heads on the exterior of the unit after installation.  The panel thickness on the 250 Series remains the same as the other series; however, the inner on the 250 is thicker and more visible.

250 Series Specifications Sheet

Series 250 Series
Application/Type BAG
GEN
LPD
Outer 200
205
Wide Flange
Inner 250
GEN Note ~
Corner Type SQ
Hinge Side TH
BH
LH
RH
RO Hinge Min 6”
RO Hinge Max 16’
RO Non-Hinge Min 6”
RO Non-Hinge Max RO Hinge * 200% up to 8’
16’
Hinge Type 1.5” AL Continuous
1.5” SS Continuous
600 Hinge
Split Type SD, Single Door
DD, Double Door
CS, Custom Split
Split Size ~
Split Notes ~
Extrustion Color ML, Mill
BK, Black
WH, White
FRGR, FR Gray
STGR, Stone Gray
Extrusion Gap for Panel 0.205”
Exterior Sheet See Color and Supplier List
Exterior Panel See Panel List
Foam ~
Interior Panel ~
Interior Sheet/Coating ~
Multi-Latch Checkbox
Key Qty. ~
Thumb Qty. ~
Finger Pull Qty.
Seal #1 No Seal
.25” Closed Cell
108 D-Seal with Glued Corners (Black)
108W D-Seal with Glued Corners (White)
Clear Buttons
Gas Strut GSNO0, No Gas Strut
GSBO0, Gas Strut, Bracket Backer Only
GSTI1, Gas Strut, Top Mount, Installed, Qty. 1
GSTS1, Gas Strut Top Mount, Shipped Loose, Qty. 1
GSTI2, Gas Strut, Top Mount, Installed, Qty. 2
GSTS2, Gas Strut Top Mount, Shipped Loose, Qty. 2
GSBI1, Gas Strut, Bottom Mount, Installed, Qty. 1
GSBS1, Gas Strut, Bottom Mount, Shipped Loose, Qty. 1
GSSI1, Gas Strut, Side Mount, Installed, Qty. 1
GSSS1, Gas Strut, Side Mount, Shipped Loose, Qty. 1
GSSI2, Gas Strut, Side Mount, Installed, Qty. 2
GSSS2, Gas Strut, Side Mount, Shipped Loose, Qty. 2
HOBI1, Hold Open Bracket, Installed, Qty. 1
HOBI1, Hold Open Bracket, Shipped Loose, Qty. 1
HOBI2, Hold Open Bracket, Installed, Qty. 2
HOBI2, Hold Open Bracket, Shipped Loose, Qty. 2
Screwcover Option SCN, None
SCP, Plastic Screwcover
3-Sided Frame Checkbox